产品中心


黄山5782 hexagonal bolt

产品描述

1. Comparison of Core Parameters of GB5783 and GB5782

Project: GB/T 5782 (Half-thread)
8.8/10.9/12.9
GB/T 5783 (Full-thread)
8.8/10.9/12.9
Strength Grade:
Head Height: Standard Height Standard Height Standard Height Standard Height
Application Features: Requires cooperation with the shank to withstand shear force Full-length thread facilitates adjustment of installation position

2. Material and Performance

1) Commonly used materials:

Carbon steel (Grade 8.8): Q235, 35K, 45#

Alloy steel (Grade 10.9-12.9): 35CrMo, 42CrMo

2) Mechanical properties:

Grade 8.8: Tensile strength ≥800MPa, Yield strength ≥640MPa

Grade 10.9: Tensile strength ≥1000MPa, Yield strength ≥900MPa

3. Surface Treatment Options

Zinc-plated (blue and white): Film thickness 5-8μm, generally corrosion-resistant, suitable for indoor dry environments

Hot-dip galvanizing: Film thickness 40-100μm, excellent corrosion resistance, suitable for outdoor/humid environments

DACROMET: Film thickness 6-12μm, excellent corrosion resistance, suitable for heavily corrosive environments

Blackening: Film thickness 0.5-1.5μm, poor corrosion resistance, suitable for environments with short-term rust prevention/aesthetic needs

3. Comparison of Application Scenarios of GB5782 and GB5783

GB5782: Structural connections that need to withstand shear force (such as steel structure beams and columns, heavy equipment bases)

GB5783: Connections that require frequent position adjustment (such as pipe flanges, adjustable brackets), thin plate connections

4. Selection Points

1) Selection of force type:

Mainly shear force → Priority selection of 5782 (shank section enhances shear resistance)

Mainly tensile force → 5783 can be selected (full thread provides a larger adjustment range)

2) Strength matching principle:

Bolt strength grade ≥ connected material strength

Important connection parts are recommended to start with grade 8.8

3) Corrosion protection requirements:

For C4 and above corrosion environments, it is recommended to use stainless steel or DACROMET treatment

5. Can GB5782 and GB5783 be used interchangeably?

A: It is not recommended. The shank section design of GB5782 has a clear mechanical function, and mixed use may change the stress characteristics of the connection point.

6. Does a grade 12.9 bolt require special installation tools?

A: Calibrated torque tools must be used, and it is recommended to use a hardness washer (HV≥450) to prevent embedding.

Recommended Combination:

Surface treatment: DACROMET + sealant

Strength grade: At least grade 8.8